Announcement

Collapse
No announcement yet.

E8400 E0 5GHz On TT 850i Water colling

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • E8400 E0 5GHz On TT 850i Water colling

    E8400 E0 5GHz On TT 850i Water colling..............







    ผลทดสอบอย่างอื่นยังไม่มีครับกำลัง Up grade ชุดน้ำ.........
    Originally posted by Dr.Pee_32 View Post
    ขอดู 3d mark 06 หน่อยจิ
    จัดไป..............i7 นะ E8400ไม่อยูแล้ว
    Last edited by arkomk; 6 Dec 2009, 23:03:06.

  • #2
    Originally posted by arkomk View Post
    E8400 E0 5GHz On TT 850i Water colling..............







    ผลทดสอบอย่างอื่นยังไม่มีครับกำลัง Up grade ชุดน้ำ.........
    แรงกระจายครับ

    Comment


    • #3
      แรงโคตรๆเลยครับ พี่น้อง

      Comment


      • #4
        *0* ไป5 แบบ สิวๆ กันเลยทีเดียว

        Comment


        • #5
          ต้องระดับนี้สำหรับE8400 กับบอร์ดแรง ๆ

          Comment


          • #6
            แรงมักๆ

            Comment


            • #7
              นับถือๆ ที่ผมเคยเล่นแค่ 4.8

              Comment


              • #8
                อุณหภูิมิเท่าไหร่บ้างครับ

                Comment


                • #9
                  Idle 42- Full71 รอประกอบเครื่องใหม่จะลอง Test อีกที

                  Comment


                  • #10
                    สอนผมหน่อยดิ ซีพียูกะบอร์ดรุ่นเดียวกันเลย ผมไม่เคยคล็อกอยากลอง ขอบคุณล่วงหน้า

                    Comment


                    • #11
                      5 GB อุอุ

                      ผม E8600 ได้ประมาณ 4.7 เอง แต่ผมพัดลม

                      Comment


                      • #12
                        อุอุ อยากเห็น Bus ซัก 600+

                        Comment


                        • #13
                          Originally posted by stunjack View Post
                          สอนผมหน่อยดิ ซีพียูกะบอร์ดรุ่นเดียวกันเลย ผมไม่เคยคล็อกอยากลอง ขอบคุณล่วงหน้า
                          Code:
                          [b][u]GIGABYTE GA-EP45_EXTREME[/u][/b]
                          [u][b]MB Intelligent Tweaker(M.I.T.)[/b][/u][b][/b]
                          Robust Graphics Booster ...............:[Manaul]
                          CPU Clock Ratio ..........................:[9 X]
                          Fine CPU Clock Ratio.....................:[+0.0]
                          CPU Frequency ...........................:[5.04 GHz (561x9)
                          
                          
                          [b]Clock Chip Control 
                          Standard Clock Control[/b]
                          CPU Host Clock Control..................: [Enabled] 
                          CPU Host Frequency (Mhz) ............: [561 Mhz[
                          PCI Express Frequency (Mhz) .........: [101]
                          
                          C.I.A.2 .................................:[Disabled]
                          
                          
                          [b]Advanced Clock Control [Press Enter][/b]
                          CPU Clock Drive...........................:[800mV]
                          PCI Express Clock Drive.................: [900mV]
                          CPU Clock Skew (ps)....................: [0ps]
                          MCH Clock Skew (ps)...................: [0ps]
                          
                          
                          [b]DRAM Performance Control[/b]
                          Performance Enhance...................: [STANDARD]
                          Extreme Memory Profile (X.M.P.).....: [Disabled[
                          (G)MCH Frequency Latch...............: [Auto]
                          System Memory Multiplier ..............:[2.00B]
                          Memory Frequency (Mhz) ..............800 [1122]
                          DRAM Timing Selectable ................: [Manual]
                          
                          [b]Standard Timing Control[/b]
                          CAS Latency Time........................4  [5]
                          tRCD ...................................4        [  5]
                          tRP'....................................4          [  5]
                          tRAS....................................12       [ 15]
                          
                           [b]Advanced Timing Control[/b]
                          tRRD...........................................[4]
                          tWTR..........................................[4]
                          tWR............................................[8]
                          tRFC...........................................[50]
                          tRTP...........................................[4]
                          Command Rate (CMD) ....................:[AUTO]
                          
                          [b]Driving Strength Profiles[/b]
                          Driving Strength ............................
                          
                          [b]Channel A[/b]
                          Static tRead Value.........................:7-10
                           tRD Phase0 Adjustment...................:<<< Leave for all below as well
                          tRD Phase1 Adjustment...................:Auto
                           tRD Phase2 Adjustment .................:Auto
                           tRD Phase3 Adjustment..................:Auto
                          Trd2rd(Different Rank)....................:Auto 
                          Twr2wr(Different Rank)...................:Auto 
                          Twr2rd(Different Rank)...................:Auto 
                          Trd2wr(Same/Diff Rank)..................:Auto 
                          Dimm1 Clock Skew Control...............:Auto  ps
                          Dimm2 Clock Skew Control...............:Auto  ps
                          
                          [b]Channel B[/b]
                          Static tRead Value.........................:7-10
                           tRD Phase0 Adjustment...................:<<< Leave for all below as well
                          tRD Phase1 Adjustment...................:[Auto]
                           tRD Phase2 Adjustment .................:[Auto]
                           tRD Phase3 Adjustment..................:[Auto]
                          Trd2rd(Different Rank)....................:[Auto] 
                          Twr2wr(Different Rank)...................:[Auto] 
                          Twr2rd(Different Rank)...................:[Auto] 
                          Trd2wr(Same/Diff Rank)..................:[Auto] 
                          Dimm1 Clock Skew Control...............:[Auto]  ps
                          Dimm2 Clock Skew Control...............:[Auto]  ps
                          
                          
                          
                          [b]Motherboard Voltage Control[/b]
                          Voltage Type.………... Manual
                          [b]CPU[/b]
                          CPU Vcore….……….........................:1.65000V]
                          CPU Termination…..... 1.200V*.......:[1.280V]
                          CPU PLL…………………....1.500V*.......: [1.580V]
                          CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
                          
                          CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
                          
                          [b]MCH/ICH[/b]
                          MCH Core…………….....1.100V...........: [1.480V]
                          MCH Reference….…….0.800V...........; [Auto]
                          MCH/DRAM Ref.…......0.900V...........: [Auto]
                          ICH I/O……………….....1.550V............: [Auto]
                          ICH Core…………...……1.100V............: [Auto]
                          
                          [b]DRAM[/b]
                          DRAM Voltage ……....1.800V............:[2.200V] 
                          DRAM Termination .…0.900V............: [Auto]
                          Channel A Reference 0.900V............: [Auto]
                          Channel B Reference 0.900V............: [Auto]
                          
                          [b]Advanced Settings[/b]
                          Limit CPUID Max. to 3.....................: [Disabled]
                          No-Execute Memory Protect............: [Enabled]
                          CPU Enhanced Halt (C1E)................: [Disabled]
                          C2/C2E State Support....................: [Disabled]
                          x C4/C4E State Support..................: [Disabled]
                          CPU Thermal Monitor 2(TM2) ...........: [Enabled]
                          CPU EIST Function.........................: [Disabled]
                          Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
                          
                          [b]Integrated Peripherals[/b]
                          Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
                          [b]Note[/b]: * refers to 45nm CPU
                          Last edited by arkomk; 18 Oct 2009, 22:44:21.

                          Comment


                          • #14
                            ลอกดีกว่า อิอิ

                            Comment


                            • #15
                              ท่านนี่วิ่งไปได้เรื่อยๆเลยเอิ๊กๆ

                              จะรอ 6Ghz ซักวันครับ

                              Comment

                              Working...
                              X