0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances?
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
--------------------------
BSOD
0x101 = add more vcore
0x1E = add more vcore
0x3B = add more vcore
0x3D = add more vcore
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT), if not add/remove vcore...have to test to see which one it is on i7 45nm, usually means too little VVT/QPI for the speed of Uncore on i7 32nm SB, usually means too little vCore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but add more vcore has helped in some instances
0x0A = unstable RAM/IMC, add more QPI first, if that doesn't work add more vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x50 = RAM timings/Frequency or uncore multi unstable, add more RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2xc
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
ผมจึง Roll back Driver กลับไปตัวปกติ ก็ไม่เจอจอฟ้าอีกเลย อันนี้ชัดเจนครับ มันไม่ใช่แค่ไฟ CPU ฮะ จอฟ้า 124 สรุปว่าไฟ CPU ไม่พอ? ก็ถูกแต่ไม่ทั้งหมดนะฮะผมว่า เลยอยากจะถามปัจจัยอื่นดู
ผมจึง Roll back Driver กลับไปตัวปกติ ก็ไม่เจอจอฟ้าอีกเลย อันนี้ชัดเจนครับ มันไม่ใช่แค่ไฟ CPU ฮะ จอฟ้า 124 สรุปว่าไฟ CPU ไม่พอ? ก็ถูกแต่ไม่ทั้งหมดนะฮะผมว่า เลยอยากจะถามปัจจัยอื่นดู
Comment