ใคร เคย oc ถึง 5Ghz แล้วมั่งอะ อยากรู้ มานลำบากแค่ไหน
Announcement
Collapse
No announcement yet.
ใคร เคย oc ถึง 5Ghz แล้วมั่ง
Collapse
X
-
สงสาร cpu: ครับ เสียดายเงินด้วย ไม่รู้ จะดันไปทำไมขนาดนั้น
แต่ใน ห้อง OC: มีท่านหนึ่ง โชว์ 5 นะ แต่ไม่รู้ใช้งานจริงเปล่า หรือแค่เอามาโชว์
Last edited by ppily; 21 Oct 2009, 11:18:56.
Comment
-
ยังนึกไม่ออกครับว่ามี CPU รุ่นไหนใช้งานที่5G ได้ครับ
ไม่รู้ว่าทำไปทำไมเหมือนกันน๊ะ แต่ต้องลองดูเองครับแล้วจะรู้ว่า อัดไปทะลุ5G มันสะใจขนาดไหน
เหมือนที่เค้าเคยเปรียบเทียบกันมั้งครับว่า รถแข่งเซ็ตเครื่องหมดกันเป็นล้านเอามาวิ่งไม่กี่นาที แถมตอนเอามาสนามต้องบรรทุกใส่สิบล้อมาอีก
คอมก้อเหมือนกันครับ ให้มันวิ่งแรงๆซักวัน 2วัน มันก้อสะใจดี^^
Comment
-
E8400 E0 5GHz On TT 850i Water colling..............
ระดับนี้ไม่เคยใช้งานจริงเกิน 5ชั่งโมง ผลเทส แค่ Super PI อย่างอื่นไม่น่าเทสผ่าน ใช้4.5 GHz พอ เสถียรแล้ว
ผลทดสอบอย่างอื่นยังไม่มีครับกำลัง Up grade ชุดน้ำ.........
Code:[b][u]GIGABYTE GA-EP45_EXTREME[/u][/b] [u][b]MB Intelligent Tweaker(M.I.T.)[/b][/u][b][/b] Robust Graphics Booster ...............:[Manaul] CPU Clock Ratio ..........................:[9 X] Fine CPU Clock Ratio.....................:[+0.0] CPU Frequency ...........................:[5.04 GHz (561x9) [b]Clock Chip Control Standard Clock Control[/b] CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: [561 Mhz[ PCI Express Frequency (Mhz) .........: [101] C.I.A.2 .................................:[Disabled] [b]Advanced Clock Control [Press Enter][/b] CPU Clock Drive...........................:[800mV] PCI Express Clock Drive.................: [900mV] CPU Clock Skew (ps)....................: [0ps] MCH Clock Skew (ps)...................: [0ps] [b]DRAM Performance Control[/b] Performance Enhance...................: [STANDARD] Extreme Memory Profile (X.M.P.).....: [Disabled[ (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier ..............:[2.00B] Memory Frequency (Mhz) ..............800 [1122] DRAM Timing Selectable ................: [Manual] [b]Standard Timing Control[/b] CAS Latency Time........................4 [5] tRCD ...................................4 [ 5] tRP'....................................4 [ 5] tRAS....................................12 [ 15] [b]Advanced Timing Control[/b] tRRD...........................................[4] tWTR..........................................[4] tWR............................................[8] tRFC...........................................[50] tRTP...........................................[4] Command Rate (CMD) ....................:[AUTO] [b]Driving Strength Profiles[/b] Driving Strength ............................ [b]Channel A[/b] Static tRead Value.........................:7-10 tRD Phase0 Adjustment...................:<<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps [b]Channel B[/b] Static tRead Value.........................:7-10 tRD Phase0 Adjustment...................:<<< Leave for all below as well tRD Phase1 Adjustment...................:[Auto] tRD Phase2 Adjustment .................:[Auto] tRD Phase3 Adjustment..................:[Auto] Trd2rd(Different Rank)....................:[Auto] Twr2wr(Different Rank)...................:[Auto] Twr2rd(Different Rank)...................:[Auto] Trd2wr(Same/Diff Rank)..................:[Auto] Dimm1 Clock Skew Control...............:[Auto] ps Dimm2 Clock Skew Control...............:[Auto] ps [b]Motherboard Voltage Control[/b] Voltage Type.………... Manual [b]CPU[/b] CPU Vcore….……….........................:1.65000V] CPU Termination…..... 1.200V*.......:[1.280V] CPU PLL…………………....1.500V*.......: [1.580V] CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly [b]MCH/ICH[/b] MCH Core…………….....1.100V...........: [1.480V] MCH Reference….…….0.800V...........; [Auto] MCH/DRAM Ref.…......0.900V...........: [Auto] ICH I/O……………….....1.550V............: [Auto] ICH Core…………...……1.100V............: [Auto] [b]DRAM[/b] DRAM Voltage ……....1.800V............:[2.200V] DRAM Termination .…0.900V............: [Auto] Channel A Reference 0.900V............: [Auto] Channel B Reference 0.900V............: [Auto] [b]Advanced Settings[/b] Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC [b]Integrated Peripherals[/b] Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB [b]Note[/b]: * refers to 45nm CPU
Comment
Comment