Announcement

Collapse
No announcement yet.

ผมลง windows อะไรไม่ได้เลยยกเว้น xp 32 bit เป็นเพราะอะไรแล้วแก้ได้รึเปล่า

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ผมลง windows อะไรไม่ได้เลยยกเว้น xp 32 bit เป็นเพราะอะไรแล้วแก้ได้รึเปล่า

    คือ เมนบอร์ด ผมเกิดเสียและหาอะไหล่ไม่ได้ผมงบหมดด้วยจึงซื้อของมือสองมาแทนจาก I7 เป็น I3 บอร์ด Gigabyte GA-H55M-UD2H แล้วทีนี้ผมก็พยายามลง windows แต่ก็จะค้างตรง starting windows ตลอด (ยังไม่เข้าหน้าเซ็ตอัพใดๆ) มีเพียงแต่ windows xp 32 บิทที่ลงผ่าน แต่พอลง windows xp 64 bit กลับค้างตรง starting windows แทบซ้ายล่างขึ้น แล้วจะค้างตอนข้อความนี้มาเหมือนกัน windows xp 64 7 32/64 8 32/64 8.1 32/64 ล้วนแล้วแต่ลงไม่ได้เลย คิดว่าเป็นที่แผ่น ก็ลองซื้อแผ่นมาทำใหม่ ก็ไม่ได้ ลองลง USB ก็ไม่ได้ ว่าได้ว่าลองทุกอย่างจริงๆคิดว่าไงครับ คิดว่าเป็นเพราะอะไรใครมีทางแก้ให้ผมบ้าง ตอบทีนะครับผมจนปัญญาจริงๆ ถ้ามีเงินจะซื้อใหม่แต่ตอนนี้ไม่มีตอบทีนะครับ ผมถามทุกคนที่ผมรู้จักแล้วก็จนกันหมด ขอบคุณครับ

  • #2
    ท่านลองเปลียนโหมดที่ไบออส มันจะมี ide กับ ahci ท่านลองปรับมาที่โหมด AHCI ดูครับแล้วลง windows7 64บิทด้วย usb ครับลองดูนะครับ

    ของเดิมเป็นแบบนี้หรือปาวครับ IDE connector supporting ATA ลองเชค hdd ด้วยนะครับถ้าฮาสดิ้สมีปัญหาก็อมีอาการแบบนี้เหมือนกันครับ
    ลองเปลียน IDE connector supporting ATA ดุสิมีให้เปลียนไปโหมดอืนหรือปาวครับ
    Last edited by khundan500; 28 Oct 2014, 15:39:35.

    Comment


    • #3
      นี้คือรุ่นของท่าน
      Gigabyte GA-H55M-UD2H?Support for an Intel? Core? i7 series processor/Intel? Core? i5 series processor/ Intel? Core? i3 series processor in the LGA1156 package (Go to GIGABYTE?s website for the latest CPU support list.)
      ?L3 cache varies with CPU

      Chipset ?Intel? H55 Express Chipset

      Memory ?4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1)
      ?Dual channel memory architecture
      ?Support for DDR3 2200+/1800/1600/1333/1066/800 MHz memory modules
      ?Support for non-ECC memory modules
      ?Support for Extreme Memory Profile (XMP) memory modules
      * To reach DDR3 2200 MHz and above, you are required to use with Intel Core i7/Core i5 CPU without HD Graphics and install a discrete graphics card.
      When using Intel Core i5/Core i3/ Pentium CPU with HD Graphics, the maximum memory speed supported is 1666 MHz
      * Go to GIGABYTE?s website for the latest memory support list.

      Onboard Graphics Integrated in the Chipset:

      ?1 x D-Sub port (Note 2)
      ?1 x DVI-D port (Note 2) (Note 3) (Note 4)
      ?1 x HDMI port(Note 2) (Note 4)
      ?1 x DisplayPort (Note 2) (Note 4)

      Audio ?Realtek ALC889 codec
      ?High Definition Audio
      ?2/4/5.1/7.1-channel
      ?Support for S/PDIF In/Out
      ?Support for CD In

      LAN ?1 x RTL8111D chip (10/100/1000 Mbit)

      Expansion Slots ?*1 x PCI Express x16 slot, running at x16 (PCIEX16) (Note 5) (The PCIEX16 slot conforms to PCI Express 2.0 standard.)
      ?*1 x PCI Express x16 slot, running at x4 (PCIEX4) (Note 6)
      ?2 x PCI slots

      Multi-Graphics Technology ?Support for ATI CrossFireX? technology(Note 6)

      Storage Interface Chipset:

      ?5 x SATA 3Gb/s connectors supporting up to 5 SATA 3Gb/s devices
      ?1 x eSATA 3Gb/s connector on the back panel supporting up to 1 SATA 3Gb/s device
      JMicron JMB368 chip:

      ?1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
      iTE IT8720 chip:

      ?1 x floppy disk drive connector supporting up to 1 floppy disk drive

      USB Chipset:

      ?Up to 12 USB 2.0/1.1 ports (6 on the back panel, 6 via the USB brackets connected to the internal USB headers)

      IEEE 1394 T.I. TSB43AB23 chip

      ?Up to 2 IEEE 1394a ports (1 on the back panel, 1 via the

      Internal I/O Connectors ?1 x 24-pin ATX main power connector
      ?1 x 4-pin ATX 12V power connector
      ?1 x floppy disk drive connector
      ?1 x IDE connector
      ?5 x SATA 3Gb/s connectors
      ?1 x CPU fan header
      ?1 x system fan headers
      ?1 x front panel header
      ?1 x front panel audio header
      ?1 x CD In connector
      ?1 x S/PDIF In header
      ?1 x S/PDIF Out header
      ?3 x USB 2.0/1.1 headers
      ?1 x IEEE 1394a header
      ?1 x serial port header
      ?1 x clearing CMOS jumper

      Back Panel Connectors ?1 x PS/2 keyboard or PS/2 mouse port
      ?1 x D-Sub port (Note 2)
      ?1 x DVI-D port (Note 2) (Note 3) (Note 4)
      ?1 x HDMI port (Note 2) (Note 4)
      ?1 x DisplayPort(Note 2)(Note 4)
      ?1 x IEEE 1394a port
      ?1 x optical S/PDIF Out connector
      ?6 x USB 2.0/1.1 ports
      ?1 x eSATA 3Gb/s connector
      ?1 x RJ-45 port
      ?6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone)

      I/O Controller ?iTE IT8720 chip

      H/W Monitoring ?System voltage detection
      ?CPU/System temperature detection
      ?CPU/System/Power fan speed detection
      ?CPU overheating warning
      ?CPU/System/Power fan fail warning
      ?CPU/System fan speed control (Note 8)

      BIOS ?2 x 64 Mbit flash
      ?Use of licensed AWARD BIOS
      ?Support for DualBIOS?
      ?PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

      Unique Features ?Support for @BIOS
      ?Support for Q-Flash
      ?Support for Xpress BIOS Rescue
      ?Support for Download Center
      ?Support for Xpress Install
      ?Support for Xpress Recovery2
      ?Support for EasyTune
      ?Support for Dynamic Energy Saver? 2
      ?Support for Smart 6?
      ?Support for Auto Green
      ?Support for Q-Share

      Bundle Software ?Norton Internet Security (OEM version)

      Operating System ?Support for Microsoft? Windows 7/Vista/XP

      Form Factor ?ATX Form Factor; 24.4cm x 23cm

      Comment


      • #4
        Originally posted by khundan500 View Post
        ท่านลองเปลียนโหมดที่ไบออส มันจะมี ide กับ ahci ท่านลองปรับมาที่โหมด AHCI ดูครับแล้วลง windows7 64บิทด้วย usb ครับลองดูนะครับ

        ของเดิมเป็นแบบนี้หรือปาวครับ IDE connector supporting ATA ลองเชค hdd ด้วยนะครับถ้าฮาสดิ้สมีปัญหาก็อมีอาการแบบนี้เหมือนกันครับ
        ลองเปลียน IDE connector supporting ATA ดุสิมีให้เปลียนไปโหมดอืนหรือปาวครับ

        เคยลองปรับดูแล้วครับ ลงไม่ได้เช่นเดิมทุกอันเลยเช่นกัน

        ลืมตอบเรื่องฮาทดิสนะครับ เคยลองเอาของเครื่องลูกมาใส่แล้วลองลง ก็ค้างจุดเดิมเลยหล่ะครับ
        Last edited by Panzery; 28 Oct 2014, 23:03:33.

        Comment


        • #5
          ลงไม่ผ่าน ลองโหลดแบบไฟล์ ghost all mainboard มาดูก่อนครับ
          โกสแล้วว่ามันใช้วินโดว์ได้ปกติรึเปล่า ถ้าใช้ได้ ก็ค่อยลองหาวิธีแก้ให้ลงโดยตรงทีหลัง

          Comment


          • #6
            งั้นผมแนะนำส่งช่างครับเดียวก้อรู้ครับ

            Comment

            Working...
            X