Tweet
อบรม Inventor 2014 Dynamic Simulation and Stress Analysis
สอบถามรายละเอียด email: ascented1@gmail.com
คุณแบงค์
ศูนย์อบรม นิคมบางปู จ.สมุทรปราการ
เวลาอบรม 9.00-16.00 น.
Course 106: Inventor 2014: Dynamic Simulation and Stress Analysis
2 Days Topics
? Static Stress Analysis
? Modal Analysis
? Optimization Study
? About Dynamic Simulation
? Dynamic Simulation Interface
? Creating Dynamic Simulations
? About Stress Analysis
? Stress Analysis User Interface
? Performing a Stress Analysis
? About Joints
? Joint Types
? Guidelines for Creating Joints
? Creating Joints
? About Redundancy
? Repairing Redundant Models
? Setting Initial Positions of Joints
? Applying Joint Torques
? Applying Imposed Motion
? Applying External Forces
? Applying Friction and Gravity
? About the Input Grapher
? Using the Input Grapher
? Running Simulations
? About the Output Grapher
? Using the Output Grapher
? Reviewing and Analyzing Simulation Results
? About Loads
? Types of Loads
? About Constraints
? Types of Constraints
? Setting Up and Running the Analysis
? Revising Models and Stress Analysis
? Reviewing and Interpreting Analysis Results
? Animating and Reporting Analysis Results
? Performing a Convergence Study
? Stress Analysis Files
? Sharing Dynamic Simulation Results with Stress Analysis
? Exporting Motion Loads to Stress Analysis
? Simulate and Analyze a Glass Lever Mechanism
? Engineering Problems and Solutions
? Solving Design Problems
? Calculate the Stress on a Wheelie Bar
? Calculate the Maximum Acceleration of a Cross Subassembly
? Validate the Robustness of an Arm Linkage
? Create a Cam Part from Motion Outputs
? Size a Spring for a Bike Suspension
? Size an Actuator
? Optimization of a Link Arm
สอบถามรายละเอียด email: ascented1@gmail.com
คุณแบงค์
ศูนย์อบรม นิคมบางปู จ.สมุทรปราการ
เวลาอบรม 9.00-16.00 น.
Course 106: Inventor 2014: Dynamic Simulation and Stress Analysis
2 Days Topics
? Static Stress Analysis
? Modal Analysis
? Optimization Study
? About Dynamic Simulation
? Dynamic Simulation Interface
? Creating Dynamic Simulations
? About Stress Analysis
? Stress Analysis User Interface
? Performing a Stress Analysis
? About Joints
? Joint Types
? Guidelines for Creating Joints
? Creating Joints
? About Redundancy
? Repairing Redundant Models
? Setting Initial Positions of Joints
? Applying Joint Torques
? Applying Imposed Motion
? Applying External Forces
? Applying Friction and Gravity
? About the Input Grapher
? Using the Input Grapher
? Running Simulations
? About the Output Grapher
? Using the Output Grapher
? Reviewing and Analyzing Simulation Results
? About Loads
? Types of Loads
? About Constraints
? Types of Constraints
? Setting Up and Running the Analysis
? Revising Models and Stress Analysis
? Reviewing and Interpreting Analysis Results
? Animating and Reporting Analysis Results
? Performing a Convergence Study
? Stress Analysis Files
? Sharing Dynamic Simulation Results with Stress Analysis
? Exporting Motion Loads to Stress Analysis
? Simulate and Analyze a Glass Lever Mechanism
? Engineering Problems and Solutions
? Solving Design Problems
? Calculate the Stress on a Wheelie Bar
? Calculate the Maximum Acceleration of a Cross Subassembly
? Validate the Robustness of an Arm Linkage
? Create a Cam Part from Motion Outputs
? Size a Spring for a Bike Suspension
? Size an Actuator
? Optimization of a Link Arm