Tweet
biosเป็นp08จะupเป็นp10
ใช้โปรแกรมอะไร updateครับ
ใช้โปรแกรมอะไร updateครับ
-
-
ทำได้ด้วยวิธีไรท์ใส่แผ่น USB Flash Drive USB Floppy
INSTRUCTIONS: BIOS updating can be accomplished VIA one of the below methods:
CD Method (Blank CD and CD Rewritable Drive Required)
Download the following .iso file: NF78_P10.iso
Use CD Burning software to burn the .iso image onto a blank CD (Nero, Alochol 120%, MagicISO etc.)
After it has burned, insert CD and restart the machine, go into the BIOS and load defaults, save and exit.
Now set the CD Drive as the primary boot device, or press escape while the system is booting to select CD as the bootable device.
After flash remove the CD, and power off PC Completely.
Turn on the PC and load defaults in BIOS
USB FLOPPY (Floppy Disk and Disk Drive Required)
Download the following executable: NF78_P10.exe
Insert blank floppy disk into drive and run executable.
Now set the USB Floppy as the primary boot device, or press escape while the system is booting to select USB Floppy as the bootable device.
After flash remove the floppy, power off PC Completely.
Turn on the PC and load defaults in BIOS.
USB Flash Drive Installation
Download NF78P10.bin.
Visit this thread and follow the installation instructions. (thanks 30h6).
Use the downloaded .bin file in the USB flash drive.Last edited by Blademint; 1 Dec 2010, 13:16:03. -
Comment