Tweet
ผู้จำหน่ายผลิตภัณฑ์อุตสาหกรรม Water Hammer Arrestor Zurn Wilkins รุ่น 1260XL (วอเตอร์แฮมเมอร์) เหมาะสำหรับ งานอุตสาหกรรมท่อที่เกิดจากแรงดันของน้ำ มีหน้าที่ช่วยป้องกันการกระแทกของน้ำ สามารถใช้ได้กับระบบน้ำอาคารทั่วไป ราคาถูก พร้อมจัดส่งทั่วประเทศ
ติดต่อขอใบเสนอราคา ช่องทางโทรศัพท์ และ ไลน์
Tel : 02-943-4814 คุณกุ๊กไก่
E-mail : pneutecthai@gmail.com
Line : @pneutecthai
ดูรายละเอียดเพิ่มเติมได้ที่
www.pneutecthai.com
Zurn Wilkins 1260XL Series
• 1260XL-A
• 1260XL-B
• 1260XL-C
• 1260XL-D
• 1260XL-E
• 1260XL-F
Features
Sizes : A, B , C, D, E, F
Temperature range : 32°F to 212°F
Pipe size : 1/2", 3/4", 1", 1.1/4", 1.1/2", 2"
End connections Threaded : 1/2", 3/4", 1"
End connections : Threaded ANSI/ASME B1.20.1
The Zurn Wilkins 1260XL Water Hammer Arrestor protects residential, commercial and industrial water lines against over-pressure during surges following quick valve closure.
• Reduces pipe banging caused by water hammer
• All copper and brass external construction
• Air chamber is permanently sealed
• Low-lead law compliant
Application
Ideal for use where Lead-Free* fittings are required. Designed to protect residential, commercial and industrial water lines during pressure surges following quick valve closure. This excessive pressure surge is absorbed by the pre-charged cushion of air permanently sealed within the water hammer arrester. The water hammer arrester may be installed within a stud bay without the need for an access panel.
Standards Compliance
• PDI® Certified WH-201
• ASSE® Listed 1010
• ANSI A112.26.1
• UPC® Listed
• Meets the requirements of NSF/ANSI/CAN 372*
*(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)
Materials
Body : Copper Tube (seamless, Type “L”)
Tailpiece : C69300 Low Lead Brass
Piston : Polycarbonate (Sizes A and B), PVC (Sizes C-F)
O-rings : EPDM
Solder : Lead Free
Lubricant : Dow-Corning Silicone Compound #111
Pressure
Maximum transient pressure surge, with arrester properly sized and placed in the water supply system, will not rise above 150 psi following quick valve closure. Maximum static pressure: 250 psi. For best performance, static line pressure should not exceed 80 psi; contact the factory for proper sizing if static pressure is greater. Max spike pressure 400 psi. Nitrogen preload 60 PSI.
Zurn Wilkins, Zurn Wilkins 1260XL, Water Hammer Arrestor, Water Hammer Arrestor ราคา, ผู้จำหน่าย Zurn Wilkins, ผู้จำหน่าย Water Hammer Arrestor
ติดต่อขอใบเสนอราคา ช่องทางโทรศัพท์ และ ไลน์
Tel : 02-943-4814 คุณกุ๊กไก่
E-mail : pneutecthai@gmail.com
Line : @pneutecthai
ดูรายละเอียดเพิ่มเติมได้ที่
www.pneutecthai.com
Zurn Wilkins 1260XL Series
• 1260XL-A
• 1260XL-B
• 1260XL-C
• 1260XL-D
• 1260XL-E
• 1260XL-F
Features
Sizes : A, B , C, D, E, F
Temperature range : 32°F to 212°F
Pipe size : 1/2", 3/4", 1", 1.1/4", 1.1/2", 2"
End connections Threaded : 1/2", 3/4", 1"
End connections : Threaded ANSI/ASME B1.20.1
The Zurn Wilkins 1260XL Water Hammer Arrestor protects residential, commercial and industrial water lines against over-pressure during surges following quick valve closure.
• Reduces pipe banging caused by water hammer
• All copper and brass external construction
• Air chamber is permanently sealed
• Low-lead law compliant
Application
Ideal for use where Lead-Free* fittings are required. Designed to protect residential, commercial and industrial water lines during pressure surges following quick valve closure. This excessive pressure surge is absorbed by the pre-charged cushion of air permanently sealed within the water hammer arrester. The water hammer arrester may be installed within a stud bay without the need for an access panel.
Standards Compliance
• PDI® Certified WH-201
• ASSE® Listed 1010
• ANSI A112.26.1
• UPC® Listed
• Meets the requirements of NSF/ANSI/CAN 372*
*(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)
Materials
Body : Copper Tube (seamless, Type “L”)
Tailpiece : C69300 Low Lead Brass
Piston : Polycarbonate (Sizes A and B), PVC (Sizes C-F)
O-rings : EPDM
Solder : Lead Free
Lubricant : Dow-Corning Silicone Compound #111
Pressure
Maximum transient pressure surge, with arrester properly sized and placed in the water supply system, will not rise above 150 psi following quick valve closure. Maximum static pressure: 250 psi. For best performance, static line pressure should not exceed 80 psi; contact the factory for proper sizing if static pressure is greater. Max spike pressure 400 psi. Nitrogen preload 60 PSI.
Zurn Wilkins, Zurn Wilkins 1260XL, Water Hammer Arrestor, Water Hammer Arrestor ราคา, ผู้จำหน่าย Zurn Wilkins, ผู้จำหน่าย Water Hammer Arrestor