ถ้าซ้ำขออภัยเด้อ
สำหรับ Intel X58
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore, or lower RAM frequency/ increase RAM voltage
0x3B = increase vcore, or lower RAM frequency/ increase RAM voltage
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x00000109 = Not enough or too Much memory voltage
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
0x24 = Disk corruption (Did you OC the PCI-E bus?)
1155 Sandy Bridge (น่าจะใช้ได้กับ 1156ด้วยมั้ง)
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
?0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances?
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
775
0x101 = increase vcore
0x124 = increase/decrease vcore or VTT
0x0A = unstable RAM/NB, increase NB/VTT first, if that doesn't work increase vcore
0x1E = increase vcore, or lower RAM frequency/ increase RAM voltage
0x3B = increase vcore, or lower RAM frequency/ increase RAM voltage
0xD1 = VTT, increase/decrease as necessary
0x9C = VTT most likely, but increasing vcore has helped in some instances
0x00000109 = Not enough or too Much memory voltage
AMD
0x124= Add more vcore
หวังว่าคงช่วยได้ไม่มากก็น้อยนะครับ สำหรับผมเคยเจอแต่ 101 124 ยังไม่เจอเลย
เครดิตจาก
สำหรับ Intel X58
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore, or lower RAM frequency/ increase RAM voltage
0x3B = increase vcore, or lower RAM frequency/ increase RAM voltage
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x00000109 = Not enough or too Much memory voltage
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
0x24 = Disk corruption (Did you OC the PCI-E bus?)
1155 Sandy Bridge (น่าจะใช้ได้กับ 1156ด้วยมั้ง)
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
?0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances?
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
775
0x101 = increase vcore
0x124 = increase/decrease vcore or VTT
0x0A = unstable RAM/NB, increase NB/VTT first, if that doesn't work increase vcore
0x1E = increase vcore, or lower RAM frequency/ increase RAM voltage
0x3B = increase vcore, or lower RAM frequency/ increase RAM voltage
0xD1 = VTT, increase/decrease as necessary
0x9C = VTT most likely, but increasing vcore has helped in some instances
0x00000109 = Not enough or too Much memory voltage
AMD
0x124= Add more vcore
หวังว่าคงช่วยได้ไม่มากก็น้อยนะครับ สำหรับผมเคยเจอแต่ 101 124 ยังไม่เจอเลย
เครดิตจาก

Comment