windows เจอ blue screen แล้ว linux จะเจอ?

[arunsawat]

จะเจออะไร?

อยากทราบว่าผู้ใช้ linux หรือ os ตัวอื่นถ้า overclock เกินอัตราจะเกิดจอฟ้าเหมือนกันมั้ย หรือ เจอ error แบบอื่น หรือ ไม่เจอ error แม้แต่ปลายนิ้วเป็นเฉพาะ windows?

[porn_43]

BSOD Codes for SandyBridge

0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances?
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage

--------------------------

BSOD

0x101 = add more vcore
0x1E = add more vcore
0x3B = add more vcore
0x3D = add more vcore
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT), if not add/remove vcore...have to test to see which one it is on i7 45nm, usually means too little VVT/QPI for the speed of Uncore on i7 32nm SB, usually means too little vCore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but add more vcore has helped in some instances
0x0A = unstable RAM/IMC, add more QPI first, if that doesn't work add more vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x50 = RAM timings/Frequency or uncore multi unstable, add more RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2xc
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r