Tweet
Originally posted by sacoolza
View Post
ผมเคยลดไฟแล้ว แต่ทดสอบ linx ไม่ผ่านน่ะครับ
ขอความกรุณาช่วยชี้แนะด้วยเถิดครับ
หรือผู้รู้ท่านอื่น จะช่วยชี้แนะให้ด้วย
ผมจะขอบคุณมากครับ...แหะๆ
ผมตั้งค่า ดังนี้
CPU Clock Ratio [20X]
CPU Frequency 4000MHz
Spread Spectrum [Disabled]
BLCK Frequency [200]
QPI Clock Ratio [auto]
System Memory Multiplier [10.0]
Memory Frequency (MHz) 200
PCI Express Frequency [auto]
CPU Clock Drive [900mV]
PCI Express Clock Drive [900mV]
CPU Clock Skew [0ps]
Intel Turbo Boost Tech. [Disabled]
CPU Cores Enabled [All]
CPU Multi-Threading [Enabled]
CPU Enhanced Halt (C1E) [Disabled]
C3/C6/C7 State Support [enabled]
CPU Thermal Monitor [Enabled]
CPU EIST Function [Disabled]
Bi-Directional PROCHOT [Enabled]
Extreme Memory Profile (X.M.P.) [Disabled]
System Memory Multiplier (SPD) [10.0]
Memory Frequency (MHz) 2000
Performance Enhance (SPD) [Turbo]
DRAM Timing Selectable (SPD) [quick]
Channel Interleaving 6 [Auto]
Rank Interleaving 4 [Auto]
Channel A Timing Settings:
Cas Latency Time [9]
tRCD [10]
tRP [9]
tRAS [27]
tRC [Auto]
tRRD [Auto]
tWTR [Auto]
tWR [Auto]
tWTP [Auto]
tWL [Auto]
tRFC [74]
tRTP [Auto]
tFAW [Auto]
Command Rate (CMD) [1]
B2B Cas Delay [Auto]
Round Trip Latency [Auto]
Channel B Timing Settings:
Cas Latency Time [9]
tRCD [10]
tRP [9]
tRAS [27]
tRC [Auto]
tRRD [Auto]
tWTR [Auto]
tWR [Auto]
tWTP [Auto]
tWL [Auto]
tRFC [74]
tRTP [Auto]
tFAW [Auto]
Command Rate (CMD) [1]
B2B Cas Delay [Auto]
Round Trip Latency [Auto]
Load-Line Calibration [level 1]
CPU Vcore [1.37500v]
QPI/Vtt Voltage [1.40000v]
PCH Core [1.05000]
CPU PLL [normal]
DRAM Voltage [1.64000]
DRAM Termination [Normal]
Ch-A Data VRef [Normal]
Ch-B Data VRef [Normal]
Ch-A Address VRef [Normal]
Ch-B Address VRef [Normal]
Isochronous Support [Enabled]
Virtualization Technology [enabled]
Comment