Tweet
ผมลองหัด oc ดู ใช้ CPU q6600 +p5q3 delux+ddr3 ได้ออกมาแบบนี้ ไม่รู้ว่าร้อนไปมั้ย.. การโอเวอร์คล็อก CPU Q6600+P5Q3 DELUXE wifi+ DDR3= ได้ 3.6 G
ตาม template นี้
Ai Overclocker Tuner: Manual
CPU Ratio Setting: 9
FSB Frequency: 400
PCIE Frequency: 100
FSB Strap To North Bridge: Auto
DRAM Frequency: DDR3_1334
DRAM CLK Skew on Channel A1: Auto
DRAM CLK Skew on Channel A2: Auto
DRAM CLK Skew on Channel B1: Auto
DRAM CLK Skew on Channel B2: Auto
DRAM Timing Control: Manual
CAS Latency: 9
DRAM RAS to CAS Delay: 9
DRAM RAS Precharge: 9
DRAM RAS Activate to Precharge: 24
RAS TO RAS Delay: Auto
Row Refresh Cycle Time: Auto
Write Recovery Time: Auto
Read To Precharge Time: Auto
Read to Write Delay(S/D): Auto
Write to Read Delay(S): Auto
Write to Read Delay(D): Auto
Read to Read Delay(S): Auto
Read to Read Delay(D): Auto
Write to Write Delay(S): Auto
Write to Write Delay(D): Auto
Write to Pre Delay: Auto
Read to Pre Delay: Auto
Pre to Pre Delay: Auto
All Pre to ACT Delay: Auto
All Pre to REF Delay: Auto
DRAM Static Read Control: Disabled
DRAM Dynamic Write Control: Disabled
DRAM Read Training: Auto
DRAM Write Training: Auto
MEM OC Charger: Auto
Ai Clock Twister: Lighter
AI Transaction Booster: Auto
CPU Voltage: 1.51250
CPU GTL Voltage Reference (0/2): 0.630
CPU GTL Voltage Reference (1/3): 0.670
CPU PLL Voltage: 1.54
FSB Termination Voltage: 1.28
DRAM Voltage: 1.60
NB Voltage: 1.18
NB GTL Voltage: 0.630
SB Voltage: 1.10
PCIE SATA Voltage: Auto
Load-Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto
CPU Margin Enhancement: Optimized
Cpu Config Setting.....
Cpu Ratio Setting = 9
C1E Support =Disabled
Max CPUID Value Limit = Disabled
Intel Virtualization Tech = Enabled
CPU TM Function = Disabled
Execute Disabled Bit = Disabled
ผมใช้ซิ้งค์รุ่นนี้ครับ
ตาม template นี้
Ai Overclocker Tuner: Manual
CPU Ratio Setting: 9
FSB Frequency: 400
PCIE Frequency: 100
FSB Strap To North Bridge: Auto
DRAM Frequency: DDR3_1334
DRAM CLK Skew on Channel A1: Auto
DRAM CLK Skew on Channel A2: Auto
DRAM CLK Skew on Channel B1: Auto
DRAM CLK Skew on Channel B2: Auto
DRAM Timing Control: Manual
CAS Latency: 9
DRAM RAS to CAS Delay: 9
DRAM RAS Precharge: 9
DRAM RAS Activate to Precharge: 24
RAS TO RAS Delay: Auto
Row Refresh Cycle Time: Auto
Write Recovery Time: Auto
Read To Precharge Time: Auto
Read to Write Delay(S/D): Auto
Write to Read Delay(S): Auto
Write to Read Delay(D): Auto
Read to Read Delay(S): Auto
Read to Read Delay(D): Auto
Write to Write Delay(S): Auto
Write to Write Delay(D): Auto
Write to Pre Delay: Auto
Read to Pre Delay: Auto
Pre to Pre Delay: Auto
All Pre to ACT Delay: Auto
All Pre to REF Delay: Auto
DRAM Static Read Control: Disabled
DRAM Dynamic Write Control: Disabled
DRAM Read Training: Auto
DRAM Write Training: Auto
MEM OC Charger: Auto
Ai Clock Twister: Lighter
AI Transaction Booster: Auto
CPU Voltage: 1.51250
CPU GTL Voltage Reference (0/2): 0.630
CPU GTL Voltage Reference (1/3): 0.670
CPU PLL Voltage: 1.54
FSB Termination Voltage: 1.28
DRAM Voltage: 1.60
NB Voltage: 1.18
NB GTL Voltage: 0.630
SB Voltage: 1.10
PCIE SATA Voltage: Auto
Load-Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto
CPU Margin Enhancement: Optimized
Cpu Config Setting.....
Cpu Ratio Setting = 9
C1E Support =Disabled
Max CPUID Value Limit = Disabled
Intel Virtualization Tech = Enabled
CPU TM Function = Disabled
Execute Disabled Bit = Disabled
ผมใช้ซิ้งค์รุ่นนี้ครับ
Comment