Announcement

Collapse
No announcement yet.

ผมรัน orthos แล้ว error ช่วยดูหน่อยครับ

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ผมรัน orthos แล้ว error ช่วยดูหน่อยครับ

    test : blend - stress CPU and RAM
    Priority : 2


    Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1790 Time: 15
    CPU: 3006MHz FSB: 333MHz [334MHz x 9.0 est.]
    CPU: 3006MHz FSB: 333MHz [334MHz x 9.0 est.]
    18/11/2551 10:58
    Launching 2 threads...
    Using CPU #0
    Beginning a continuous self-test to check your computer.
    Press Stop to end this test.
    Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
    Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
    Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
    Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
    Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length.
    Test 6, 4000 Lucas-Lehmer iterations of M18874367 using 1024K FFT length.
    Test 7, 4000 Lucas-Lehmer iterations of M18474367 using 1024K FFT length.
    Test 8, 4000 Lucas-Lehmer iterations of M18274367 using 1024K FFT length.
    FATAL ERROR: Rounding was 0.5, expected less than 0.4
    Hardware failure detected, consult stress.txt file.
    Torture Test ran 14 minutes 14 seconds - 1 errors, 0 warnings.
    Execution halted.


    ส่วนอีกอันปกติมั้ง

    งง เป็นที่อะไรครับ

    ตอนนี้ใช้ e4300 @ 3.0G ram 2G รัน ddr667 ใช้ dfi-dark

    อุณหภูมิไม่มีปัญหา core ประมาณ 68 มั้ง ถ้า cpu 48

    เล่นเกมแล้วหลุดไม่แน่ไม่นอน เหมือนเมื่อก่อนก้เป็นนะ แต่ไม่ได้ถี่เหมือนช่วงนี้

    หรือว่ามันเป็นที่ VGA มีอะไรทดสอบป่าวใช้ spark 8600gt a260

  • #2
    มันไม่สเถียรอะดิ Priority : 2 ยังไม่ผ่านเลย เค้าวัดกันที่ Priority:9

    Comment


    • #3
      ทดแรม 1:1 แล้วก็ลองไส่ไฟเพิ่มอีกครับ ดูเรื่องอุณหภูมิด้วย

      บอร์ดตัวนี้ผมก็ใช้อยู่ nb ร้อนมากมายเวลา oc
      หาพัดลมเป่าก็จะดีครับ

      Comment


      • #4
        ถ้าทดสอบ VGA ลอง Furmark 1.4.0 ดูครับ หรือไม่ก็พวก 3DMark ทั้งหลาย

        แต่ถ้า Othos ไม่ผ่านนี่ไม่ใช่ VGA แน่นอนครับ

        Comment


        • #5
          เป็นที่ CPU หรือ Ram ครับ
          ถ้าไม่ผ่าน ต้องจูน ไฟให้เหมาะสม นะครับ

          บอกรายละเอียดเพิ่มสิครับ จะได้ช่วยกันจูน

          Comment


          • #6
            ลองเพิ่มไฟ cpu ขึ้นไปอีกครับ orthos กินไฟ cpu เยอะครับ

            Comment


            • #7
              อยากรู้ว่าเป็นกะ cpu หรือแรม ก็ลองเลือกโหมดของการเทสเป็นอย่างๆดูงับ
              มันมีแยกให้เทสแต่ cpu อย่างเดียวด้วย ถ้าเทสตัวนี้ผ่าน ค่อยให้ความสนใจไปที่แรม ....

              Comment


              • #8
                อย่าลืม Priority 10 ด้วยนะครับ

                Comment


                • #9
                  ใน bios ขึ้น
                  current cpu voltage 1.31V
                  dram v. 1.90v
                  VTT 1.20V
                  NB voltage 1.26V
                  SB voltage 1.50V

                  ถ้าจำไม่ผิดไม่เคยปรับอะไรเลย ปรับแค่ให้ nb strap 266MHz. แล้วก็ปรับเป็น cpu clock 333 MHz. Dram speed 533 MHz ก็จะออกมาเป็นตามที่บอก

                  เท่าที่ลองรัน orthos รู้สึก cpu จะผ่านแต่ติดตรงแรมอะครับ ช่วยด้วยทำไงดี

                  Comment


                  • #10
                    เพิ่มไฟแรมเข้าไปซิครับ 2.2V

                    Comment


                    • #11
                      ไม่เยอะไปหรอ ??? ผมก้ไม่เคย oc แบบจูนไฟหรอก พึ่งเริ่มทำก้ตามที่บอกนั้นแหละ

                      Comment

                      Working...
                      X