Tweet
A picture of ECS' top of the line socket AM3+ motherboard also made it to the web. Called the ECS Black Series A990FXM-A, the board expands a little on the chipset's features. Its component layout is similar to most AM3+ motherboards we've seen, with the AMD 990FX northbridge being located south of the CPU VRM area, sharing heat with it over a common heatsink. The CPU socket is wired to four DDR3 DIMM slots supporting dual-channel DDR3-1866 standard, and DDR3-2133 MHz by overclocking.
Expansion slots include three PCI-Express 2.0 x16 (x16/NC/x16 or x16/x8/x8), supporting NVIDIA 3-way SLI and AMD CrossFireX. Other expansion slots include two PCI-E x1 and a PCI. Storage connectivity includes six internal SATA 6 Gb/s from the southbridge, and a third-party SATA/IDE controller that gives out an internal IDE connector and two eSATA 3 Gb/s ports. Other connectivity features include 8+2 channel HD audio, dual gigabit Ethernet, four USB 3.0 ports (two by header), and Bluetooth. There are some overclocker-friendly features, such as onboard power/reset, rear-panel CMOS clear, onboard PC speaker, diagnostic LED display, and long 8-pin EPS connector for accessibility. Like most other boards, the ECS A990FXM-A is expected to be out in mid-June.
Source : Techpowerup
ปล.ไม่มีเวลาแปล นั่งปั่นงานอยู่
งดแรงชั่วคราว 
Comment