Tweet
After introducing some of the most efficient CPU coolers, the Japanese cooling specialist, Scythe, is now planning to launch a new cooler named KillerWhale, designed and manufactured originally by DeepCool, distributed by Scythe. This cooler is specifically designed keeping the Intel LGA-1366 socket in mind, where a slightly bigger, rectangular base serves the application better.
The most characteristic feature of this cooler is its large, rather thick fan and sweep area. Its construction seems fairly simple: six heatpipes arise from a rectangular copper CPU contact block, which convey heat to an aluminum fin array that propagates along the plane of the motherboard. The entire cooler measures 54.5 x 143 x 143.5 mm, and weighs 900g (around 2 lbs). The 120mm fan rotates at speeds between 800 and 1800 rpm to dole out up to 78.32 CFM of air. The KillerWhale supports Intel LGA-1366, LGA-775, AMD AM3, AM2+, AM2, 940 and 939 sockets. It will hit stores soon.
Source:techpowerup.com
Read More
The most characteristic feature of this cooler is its large, rather thick fan and sweep area. Its construction seems fairly simple: six heatpipes arise from a rectangular copper CPU contact block, which convey heat to an aluminum fin array that propagates along the plane of the motherboard. The entire cooler measures 54.5 x 143 x 143.5 mm, and weighs 900g (around 2 lbs). The 120mm fan rotates at speeds between 800 and 1800 rpm to dole out up to 78.32 CFM of air. The KillerWhale supports Intel LGA-1366, LGA-775, AMD AM3, AM2+, AM2, 940 and 939 sockets. It will hit stores soon.
Source:techpowerup.com
Read More
งดแรงชั่วคราว 
Comment