Tweet
Originally posted by smadchai
View Post
ลอง TEST เบาๆแต่ ไฟหนักเอาการครับ
กำลังลดไฟลงอยู่ครับ แต่ความร้อนกลับสูงกว่าเดิมอีกครับ
3DMark05
ลองดูครับ ท่านโจอาจจะคล้ายๆกันก็ได้ครับ
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: [Auto]
CPU Clock Ratio ..........................: [8x]
Fine CPU Clock Ratio.....................:[+0.5]
CPU Frequency ............................:4.00GHZ (471X8.5)
********** Clock Chip Control ********
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: [471]
PCI Express Frequency (Mhz) .........:[100]
C.I.A.2 ...........................................:[Disabled]
>>>>> Advanced Clock Control
Advanced Clock Control [Press Enter]
******** DRAM Performance Control ********
Performance Enhance..............................: [Turbo]
Extreme Memory Profile (X.M.P.).............: [DISABLED]
(G)MCH Frequency Latch.........................: [400MHZ]
System Memory Multiplier (SPD)..............: [2.00D]
Memory Frequency (Mhz) 1066..............: [942] ไม่ต้องสนใจครับบอร์ดปรับให้เอง
DRAM Timing Selectable (SPD)................: [MANUAL]
>>>>> Standard Timing Control
CAS Latency Time.............................. 5
tRCD .................................................5
tRP....................................................5
tRAS............................................... 15
Advanced Timing Control [Press Enter]
****** Motherboard Voltage Control ******
>>> CPU
Load-Line Calibration...................[Enabled]
CPU Vcore...............: 1.21250V [1.33125] ตอนนี้ลลองลดลงที่ [1.30000]
CPU Termination........... 1.200V [1.260V]
CPU PLL..........................1.500V [1.500]
CPU Referen...................0.760V [0.838] (0.800) @ 1.20vtt
>>>MCH/ICH
MCH Core.......................1.100V [1.280V]
MCH Reference...............0.760V [0838](0.800) @ 1.20vtt
MCH/DRAM Ref...............0.900V [0.920] Auto ไว้ก่อนครับ
ICH I/O...........................1.500V [1.59]
ICH Core.........................1.100V [1.200]
>>> DRAM
DRAM Voltage .....................1.800V [1.840] (2.100V) ปรับตามแรมครับ
DRAM Termination .................900V [0.920] Auto ไว้ก่อนครับ
Channel A Reference........... 0.900V [0.920] Auto ไว้ก่อนครับ
Channel B Reference........... 0.900V [0.920] Auto ไว้ก่อนครับ
-------------------------------------------------------------
Advanced Bios Features
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect...........: [Enabledh]
CPU Enhanced Halt (C1E)...............: [Disabled]
C2/C2E State Support...................: [Disabled]
x C4/C4E State Support................: [Disabled]
CPU Thermal Monitor 2(TM2) .......: [Enabled]
CPU EIST Function........................: [Disabled]
Virtualization Technology..............: [Disabled]
>>>>>>>>>>>>>>ได้มาจากเว็บเพื่อนบ้านครับ<<<<<<<<<<<<<<<<
================================================================================================
ปล. ทดสอบครั้งแรก 04/12/12 ครั้งที่สอง 05/12/12
กำลังลดไฟลงอยู่ครับ แต่ความร้อนกลับสูงกว่าเดิมอีกครับ
3DMark05
ลองดูครับ ท่านโจอาจจะคล้ายๆกันก็ได้ครับ
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: [Auto]
CPU Clock Ratio ..........................: [8x]
Fine CPU Clock Ratio.....................:[+0.5]
CPU Frequency ............................:4.00GHZ (471X8.5)
********** Clock Chip Control ********
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: [471]
PCI Express Frequency (Mhz) .........:[100]
C.I.A.2 ...........................................:[Disabled]
>>>>> Advanced Clock Control
Advanced Clock Control [Press Enter]
******** DRAM Performance Control ********
Performance Enhance..............................: [Turbo]
Extreme Memory Profile (X.M.P.).............: [DISABLED]
(G)MCH Frequency Latch.........................: [400MHZ]
System Memory Multiplier (SPD)..............: [2.00D]
Memory Frequency (Mhz) 1066..............: [942] ไม่ต้องสนใจครับบอร์ดปรับให้เอง
DRAM Timing Selectable (SPD)................: [MANUAL]
>>>>> Standard Timing Control
CAS Latency Time.............................. 5
tRCD .................................................5
tRP....................................................5
tRAS............................................... 15
Advanced Timing Control [Press Enter]
****** Motherboard Voltage Control ******
>>> CPU
Load-Line Calibration...................[Enabled]
CPU Vcore...............: 1.21250V [1.33125] ตอนนี้ลลองลดลงที่ [1.30000]
CPU Termination........... 1.200V [1.260V]
CPU PLL..........................1.500V [1.500]
CPU Referen...................0.760V [0.838] (0.800) @ 1.20vtt
>>>MCH/ICH
MCH Core.......................1.100V [1.280V]
MCH Reference...............0.760V [0838](0.800) @ 1.20vtt
MCH/DRAM Ref...............0.900V [0.920] Auto ไว้ก่อนครับ
ICH I/O...........................1.500V [1.59]
ICH Core.........................1.100V [1.200]
>>> DRAM
DRAM Voltage .....................1.800V [1.840] (2.100V) ปรับตามแรมครับ
DRAM Termination .................900V [0.920] Auto ไว้ก่อนครับ
Channel A Reference........... 0.900V [0.920] Auto ไว้ก่อนครับ
Channel B Reference........... 0.900V [0.920] Auto ไว้ก่อนครับ
-------------------------------------------------------------
Advanced Bios Features
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect...........: [Enabledh]
CPU Enhanced Halt (C1E)...............: [Disabled]
C2/C2E State Support...................: [Disabled]
x C4/C4E State Support................: [Disabled]
CPU Thermal Monitor 2(TM2) .......: [Enabled]
CPU EIST Function........................: [Disabled]
Virtualization Technology..............: [Disabled]
>>>>>>>>>>>>>>ได้มาจากเว็บเพื่อนบ้านครับ<<<<<<<<<<<<<<<<
================================================================================================
ปล. ทดสอบครั้งแรก 04/12/12 ครั้งที่สอง 05/12/12
Comment