Announcement

Collapse
No announcement yet.

E2140 มันมี sSpec Number 2 รหัส

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • E2140 มันมี sSpec Number 2 รหัส

    E2140

    มันมี sSpec Number 2 รหัส SLA93 ,SLA3J มันแตกต่างที่
    Thermal Specification:73.2°C กับ 61.4°C

    และอยากทราบว่าเจ้า Thermal Specification มันคือความร้อนสูงสุดที่ซีพียูรับได้ ใช่หรือเปล่าครับ

    เวลาซื้อควรเลือกรหัสไหนดีครับ
    Last edited by king007; 11 Aug 2007, 12:27:13.

  • #2
    ความรู้ของผมอีกแระ จดก่อนน้า

    Comment


    • #3
      หาข้อมูลตั้งนาน ได้มาแล้วครับ

      รหัส sSpec# เพราะที่ผ่านมานั้น รหัสของ sSpec# พอที่จะเป็นตัวบ่งบอกได้ในระดับหนึ่งว่ารหัสตัวใดของซีพียูในรุ่นนั้นๆ มีขีดความสามารถในการโอเวอร์คล๊อกที่ดีกว่า หรือนอกจากเรื่องของความสามารถในการโอเวอร์คล๊อกแล้วนั้น รหัสจุดนี้ยังเป็นตัวที่บ่งบอกได้อีกว่าซีพียูในแต่ละรหัสนั้นมีอัตราการปล่อยพลังงานความร้อนสูงสุดที่แตกต่างกันออกไปอีกด้วย
      สรุปแล้ว E2140 ต้องเอารหัสนี้ SLA3J เพราะมันเย็นกว่าครับ สุงสุดแค่ 61.4°C เอง

      Comment


      • #4
        Thermal Specification:73.2°C ซิครับ เพราะ ทนร้อนได้มากก่า

        Comment


        • #5
          ตกลงมันคือ
          ความร้อนสูงสุดที่ปล่อยออกมา
          หรือ
          ความร้อนสูงสุดที่ทนได้
          ช่วยยืนยันหน่อยครับ

          Comment


          • #6
            ตัวใหม่กว่าก็ต้องดีกว่าสิครับ ไม่งั้นเค้าจะทำใหม่ทำไมอะ
            sla93 เป็น stepping G0 อะ ที่เค้าเขียน thermal spec คือรับอุณหภูมิได้สูงสุดแค่ไหนไม่ใช่หรอ

            Comment


            • #7
              SLA93 ,SLA3J


              เอาเข้าใจง่ายๆ อันไหนดีกว่าครับ ?

              ( อันไหนคือตัวไหม่นั่นเอง)

              Comment


              • #8
                SLA93

                คือตัวใหม่ครับ

                Comment


                • #9
                  นั่นสิครับ ความร้อนที่ปล่อยออกมาหรือทนได้ แต่คงต้องเลือกตัวใหม่ครับ SLA93

                  Comment


                  • #10
                    ข้อนี้รบกวนผู้รู้จริงช่วยมาตอบทีนะครับ เป็นความอย่างยิ่งหุหุ งงกัน ยาวเลย

                    ขอบคุณล่วงหน้าคับ

                    Comment


                    • #11
                      Thermal Specification: The thermal specification shown is the maximum case temperature at the maximum Thermal Design Power (TDP) value for that processor. It is measured at the geometric center on the topside of the processor integrated heat spreader. For processors without integrated heat spreaders such as mobile processors, the thermal specification is referred to as the junction temperature (Tj). The maximum junction temperature is defined by an activation of the processor Intel® Thermal Monitor. The Intel Thermal Monitor’s automatic mode is used to indicate that the maximum TJ has been reached.

                      แปลเอาคับ จากเว็บ http://processorfinder.intel.com/det...px?sspec=sla3j ^^

                      แปลไม่ออก แต่ที่รู้ๆ คือ2ตัวนี้ไม่ใช่ G0 ทั้งคู่ - -*
                      Last edited by pattrick; 19 Aug 2007, 23:11:08.

                      Comment

                      Working...
                      X