Announcement

Collapse
No announcement yet.

ถามเรื่อง SSD กับ AHCI ค่ะ

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ถามเรื่อง SSD กับ AHCI ค่ะ

    คือหนูมีงบว่าจะซื้อ SSD มาสักตัว แต่ก็สงสัยว่า การเปิด AHCI จะส่งผลดีกับการใช้ฮาร์ดดิสค์แบบ SSD มั้ยนะ
    เพราะเท่าที่รู้คือ AHCI จะช่วยให้ใช้ NCQ ของฮาร์ดดิสค์แบบหัวอ่านได้ แต่ SSD ไม่มีหัวอ่าน
    แล้วถ้าจะเปิดหรือปิด AHCI มันจะต่างกันไหมคะ

  • #2
    จาก OCZ
    AHCI
    AHCI is not official supported on OCZ SSDs and may under some circumstances affect performance,
    specifically during windows installation. Enabling AHCI can result in higher performance in synthetic
    benchmarks for SSDs and HDDs alike, but can cause hang-ups and intermittent freezes in SSDs since it
    allows multiple access requests to compete for a drive that is not made to address re-ordering of
    commands in the queue. We recommend AHCI is set to disabled in both Windows and in the BIOS.
    Native Command Queuing greatly increases the performance of standard rotational drives but it has no
    bearing on SSDs.

    Credit : http://www.ocztechnology.com/images/...ng-Up-SSDs.pdf

    ยี่ห้อ ไม่แน่ใจ แต่คิดว่าไม่น่าจะต่างกัน

    Comment


    • #3
      สรุปก็คือ ควรจะ disabled

      Comment


      • #4
        เท่าที่ผมดู ยี่ห้ออื่นๆน่าจะไม่มีปัญหาเหมือน OCZ นะ
        แล้วการเปิดโหมด AHCI เหมือนเป็นการเปิดทางให้กับ NCQ เฉยๆ(ซึ่งถ้ามีก็ใช้ได้ ถ้าไม่มีก็คงจะไม่เป็นไร) แต่ AHCI ยังซ่อนความสามารถอื่นๆไว้อีก เช่น Hot Swap อ่านะ

        น่าลองนะครับ!

        แร๊งงงงงงง!!

        Comment

        Working...
        X