เครื่องผมชอบขึ้นจอฟ้าครับและขึ้นข้อความว่า
A problem has been detected and windows has been shut down to prevent damage
To you computer
A process or thread crucial to system operation has unexpectedly exited or been
terminated
If this is the first time you’ve seen this stop error screen
restart you computer. If this screen appears again , follow
this steps:
Check to make sure any new hardware or software is properly installed
If this is a new installation , ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue , disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe made to remove or disable components , restart
Your computer , press F8 to select Advanced startup option , and then
select safe made.
Technical information :
**Stop : 0x000000F4 (0x00000003 , 0x8662CDA0 , 0x8662CF14 , 0x80604498)
Beginning dump of physical memory
ลงโปรแกรมใหม่ก็ไม่ได้ครับมันขึ้นว่า
Setup did not find any hard disk driver installed in your computer.
Make sure any hard disk driver are powered on any properly connected.
to your computer , and that any disk-related hardware configuration is
correct . this may involve running a manufacturer-supplied diagnostic
or setup program.
Setup cannot continue. T quit setup , press F3
มันเป็นเพราะอะไรครับและจะแก้ได้อย่างไงครับ
A problem has been detected and windows has been shut down to prevent damage
To you computer
A process or thread crucial to system operation has unexpectedly exited or been
terminated
If this is the first time you’ve seen this stop error screen
restart you computer. If this screen appears again , follow
this steps:
Check to make sure any new hardware or software is properly installed
If this is a new installation , ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue , disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe made to remove or disable components , restart
Your computer , press F8 to select Advanced startup option , and then
select safe made.
Technical information :
**Stop : 0x000000F4 (0x00000003 , 0x8662CDA0 , 0x8662CF14 , 0x80604498)
Beginning dump of physical memory
ลงโปรแกรมใหม่ก็ไม่ได้ครับมันขึ้นว่า
Setup did not find any hard disk driver installed in your computer.
Make sure any hard disk driver are powered on any properly connected.
to your computer , and that any disk-related hardware configuration is
correct . this may involve running a manufacturer-supplied diagnostic
or setup program.
Setup cannot continue. T quit setup , press F3
มันเป็นเพราะอะไรครับและจะแก้ได้อย่างไงครับ
Comment