Announcement

Collapse
No announcement yet.

>>> มีวิธีปรับค่าใน XP ให้เห็น L2-Cache เพื่อ Maximum Performance... มาให้ดูกันครับ

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • >>> มีวิธีปรับค่าใน XP ให้เห็น L2-Cache เพื่อ Maximum Performance... มาให้ดูกันครับ

    แปลกมาก ใน Regedit (พิมพ์ที่ Start -> Run -> พิมพ์ Regedit)
    XP ค่า Default ของ SecondLevelDataCache เป็น 0

    เข้าตามนี้นะครับ (คลิกที่ช่องด้านซ้าย)

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management

    ดับเบิ้ลคลิกทางด้านขวา คำว่า SecondLevelDataCache
    เลือกเป็น Decimal (เลขฐานสิบ เนื่องจาก Hex... มันเป็นฐาน 16)
    ปรับขนาดของ L2_Cache ตาม CPU ของท่านครับ

    ก็ไม่ได้คิดเองครับ
    พอดีไปอ่านเจอมาที่ arip อ่ะครับ

    เท่าที่ลองกับโน๊ตบุคผม (ASUS A6QT Turion64x2 TL52, Ram1.3GB bus533)
    ลองเทสตู้ปลา... ปรากฎว่า
    คะแนน CPU ขึ้นมาประมาณ พัน กว่าคะแนน เป็น 52,000 จาก 51,000

    CPU-mark คะแนนเท่าเดิมเลย (Version เก่า 32bit)

    เล่นเกมพวก BF2 ก็ยังไม่ค่อยเห็นความแตกต่างเท่าไหร่ ....

    Benchmark ตัวอื่นๆ ยังไม่ได้ลอง เนื่องจากไม่ค่อยได้โหลดไว้

    หากใครมีวิธีทดสอบการเปลี่ยนแปลงกับการปรับค่าครั้งนี้อย่างไร
    บอกไว้ด้วยนะครับ เพราะอยากรู้เหมือนกัน แต่ไม่ค่อยมีข้อมูลพวก
    Program Benchmark ที่จะเทสเท่าไหร่

    ลองทำดูครับ

  • #2
    น่าสน

    Comment


    • #3
      ใน​เวปของ​ microsoft ​บอก​ไว้​ชัดเจนว่า
      วินโดวส์​จะ​ใช้​ค่า​จาก​ registry ​ใน​การหา​ L2 cache
      ก็ต่อเมืื่อ
      มันไปถาม​จาก​ HAL ​แล้ว​ไม่​ทราบว่าซีพียูมี​ L2 cache ​เท่า​ไหร่
      ซึ่ง​เหมาะ​กับ​ซีพียูรุ่นเก่าๆ​ (ประมาณเพนเทียมร้อย)

      Comment


      • #4
        น่าลองมักๆๆ

        Comment


        • #5
          Originally posted by gimkim View Post
          ใน​เวปของ​ microsoft ​บอก​ไว้​ชัดเจนว่า
          วินโดวส์​จะ​ใช้​ค่า​จาก​ registry ​ใน​การหา​ L2 cache
          ก็ต่อเมืื่อ
          มันไปถาม​จาก​ HAL ​แล้ว​ไม่​ทราบว่าซีพียูมี​ L2 cache ​เท่า​ไหร่
          ซึ่ง​เหมาะ​กับ​ซีพียูรุ่นเก่าๆ​ (ประมาณเพนเทียมร้อย)
          ไปอ่านมา จริง ครับ

          ลิงค์นี้เลย


          ส่วนหนึ่ง

          This is not related to the hardware; it is only useful for computers with direct-mapped L2 caches. Pentium II and later processors do not have direct- mapped L2 caches. SecondLevelDataCache can increase performance by approximately 2 percent in certain cases for older computers with ample memory (more than 64 MB) by scattering physical pages better in the address space so there are not so many L2 cache collisions. Setting SecondLevelDataCache to 256 KB rather than 2 MB (when the computer has a 2 MB L2 cache) would probably have about a 0.4 percent performance penalty.

          Comment


          • #6
            Originally posted by gimkim View Post
            ใน​เวปของ​ microsoft ​บอก​ไว้​ชัดเจนว่า
            วินโดวส์​จะ​ใช้​ค่า​จาก​ registry ​ใน​การหา​ L2 cache
            ก็ต่อเมืื่อ
            มันไปถาม​จาก​ HAL ​แล้ว​ไม่​ทราบว่าซีพียูมี​ L2 cache ​เท่า​ไหร่
            ซึ่ง​เหมาะ​กับ​ซีพียูรุ่นเก่าๆ​ (ประมาณเพนเทียมร้อย)
            Originally posted by kidnun View Post
            ไปอ่านมา จริง ครับ

            ลิงค์นี้เลย


            ส่วนหนึ่ง

            This is not related to the hardware; it is only useful for computers with direct-mapped L2 caches. Pentium II and later processors do not have direct- mapped L2 caches. SecondLevelDataCache can increase performance by approximately 2 percent in certain cases for older computers with ample memory (more than 64 MB) by scattering physical pages better in the address space so there are not so many L2 cache collisions. Setting SecondLevelDataCache to 256 KB rather than 2 MB (when the computer has a 2 MB L2 cache) would probably have about a 0.4 percent performance penalty.
            งั้นแสดงว่าเราต้องชี้แนะมันให้รู้จักค่าl2เองใช่ปะครับ
            จะได้ทำอย่างที่ท่านเข้าของกระทู้บอก

            Comment


            • #7
              จากการที่ไปอ่านเว็บอ่านที่เข้าพูดๆกัน ถ้าตั้งค่าเป็น0แสดงว่ามันหาแคสออโต้อยู่แล้วครับไม่ต้องไปตั้งอีก
              แต่ถ้าเครื่องเก่าๆก่อนแพนเทีย3ก็ต้องตั้งมัน
              แค่นี้เองจบข่าว

              ถามเองตอบเองซะงั้น อิอิ -,-

              Comment


              • #8
                อดเลยเราใช้ วิน 7

                Comment


                • #9
                  มันต้องลองงงงงงงงงงง

                  Comment


                  • #10
                    จด จด ...

                    Comment


                    • #11
                      อ่านแล้วก้ลืม

                      Comment

                      Working...
                      X