Tweet
รบกวนหน่อยครับ ผมซื้อรีโมท CHUNGHOP รุ่น RM-88E Universal TV Remote เืพื่อมาใช้กับทีวี SONY Trinitron 25" Flatron ของผม ปรากฏว่ามันไม่คู่มือภาษาไทยครับ ผมไม่ค่อยเก่งอังกฤษ รบกวนเพื่อนๆ ช่วยแปลให้พอรู้เรื่องหน่อยครับ พยายามแปลแล้วก็ยังไม่รู้เรื่อง ช่วยหน่อยนะคับ ขอบคุณล่วงหน้า อิอิ 
------------------------------
1. Find out the 3-digit code for the TV that you desire to control from the "code list" .In case there are several groups of codes available, please use the first group at first;
2. Press and hold the "Setting" button at first, then press the "TV" button. Release both buttons after the indicator light illuminates, indicationg the status of code input;
3. Input sequentially the 3-digit code that you have obtained. The indicator light flashed once when one digit is input. After the input of the code, the indicator light extinguishes;
Note: In case the indicator light keeps inlluminating after two flashes, you only need to input the correct 3-digit code and do not repeat step 2, otherwise a resetting started form Step 2 shall cemmence.
4. When the indicator light extinguishes, the setting ends, Please test the remote control can work normally or not, if not, reset it form step 1 and try next 3-digit code
-------------------------
------------------------------
1. Find out the 3-digit code for the TV that you desire to control from the "code list" .In case there are several groups of codes available, please use the first group at first;
2. Press and hold the "Setting" button at first, then press the "TV" button. Release both buttons after the indicator light illuminates, indicationg the status of code input;
3. Input sequentially the 3-digit code that you have obtained. The indicator light flashed once when one digit is input. After the input of the code, the indicator light extinguishes;
Note: In case the indicator light keeps inlluminating after two flashes, you only need to input the correct 3-digit code and do not repeat step 2, otherwise a resetting started form Step 2 shall cemmence.
4. When the indicator light extinguishes, the setting ends, Please test the remote control can work normally or not, if not, reset it form step 1 and try next 3-digit code
-------------------------
Comment